I recently upgraded some switches 3750 from 12.2(35) ipbase to 12.2(44) and now the "ip tacacs source-interface command is missing" Anyone else seen this?. I upgraded my lab 3560 to same rev of code and found the same command missing.
________________________________________ From: [EMAIL PROTECTED] [EMAIL PROTECTED] On Behalf Of eliran h [EMAIL PROTECTED] Sent: Tuesday, January 22, 2008 5:15 AM To: cisco-nsp@puck.nether.net Subject: [c-nsp] GRP and GRP-B compatibility Hello everyone, Can I run SSO using GRP and a GRP-B in a 12000 platforms, Thanks, Eliran _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/