There have been some cases reported here (for other IOS), that this command might have moved under the "aaa group xxx" for tacacs.
-- Tassos Higham, Josh wrote on 22/1/2008 8:11 μμ: >> [mailto:[EMAIL PROTECTED] On Behalf Of Mike Louis >> >> I recently upgraded some switches 3750 from 12.2(35) ipbase >> to 12.2(44) and now the "ip tacacs source-interface command >> is missing" Anyone else seen this?. I upgraded my lab 3560 to >> same rev of code and found the same command missing. > > I believe that the source-interface command is silently dropped if the > interface doesn't exist. Not sure if that's what you hit, but it's > caught me on several occasions. > > Thanks, > Josh > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/