Its not being dropped from the configuration, its not available in the global configuration. (config)#
-----Original Message----- From: Higham, Josh [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 22, 2008 1:12 PM To: Mike Louis; cisco-nsp@puck.nether.net Subject: RE: [c-nsp] 3560/3750 12.2(44) > [mailto:[EMAIL PROTECTED] On Behalf Of Mike Louis > > I recently upgraded some switches 3750 from 12.2(35) ipbase > to 12.2(44) and now the "ip tacacs source-interface command > is missing" Anyone else seen this?. I upgraded my lab 3560 to > same rev of code and found the same command missing. I believe that the source-interface command is silently dropped if the interface doesn't exist. Not sure if that's what you hit, but it's caught me on several occasions. Thanks, Josh Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
