Hi, On Thu, Feb 07, 2008 at 09:35:16AM -0600, Justin Shore wrote: > > and swapping from a WS-X6348-RJ-45 to a WS-X6548-RJ-45 made a big > > difference in the output drops (but didn't totally stop them). > > Another option to consider would be the 6148A model. > > http://tinyurl.com/2uom4p > > The 6148A model has 5.3MB of buffer per port whereas the plain 6148 only > has 128KB. That might suit his needs too. > > I always make a point to use 6748s but that would be a waste of money > given the Sup Robert has to work with.
Watch out. I think you're comparing 100Mbit modules with GigE modules.
If I remember correctly, the 6148A is actually "6148A-GE-TX", while
there is also an "6148-RJ-45", which is 100 Mbit only.
And the price difference between a WS-X6348-RJ-45 (10/100) and a 6748
(GE, Fabric only, not in Sup2 switches, etc.) is significant :-)
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [EMAIL PROTECTED]
fax: +49-89-35655025 [EMAIL PROTECTED]
pgph7cO4IdThl.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
