On Feb 7, 2008 6:20 PM, Justin Shore <[EMAIL PROTECTED]> wrote: > Gert Doering wrote: > > >> The 6148A model has 5.3MB of buffer per port whereas the plain 6148 only > >> has 128KB. That might suit his needs too. > > > > Watch out. I think you're comparing 100Mbit modules with GigE modules.
The 6148A 10/100 version has ~5MB buffers too, so Output drops issue should be present there. I'll check our spare cards storage, maybe we have 6148A on stock. Currently I found that I can group buffers from each 12 ports. It could be done by hidden command 'wrr-queue mode-cos group-buffers' on first FE of each 12 port groups. It gives about 1MB buffer instead of 100kB. Anybody here tried group-buffering already ? I will try to commit this command on my Catalayst tomorrow. Robert _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
