On Sun, 2008-02-10 at 13:33 +0100, Peter Rathlev wrote: > I think the Cat6500 has the "override" keyword, so you can add the line > "mls qos cos override", which should do what you want, i.e. setting CoS > 5 for all packets arriving at the port.
> On Sun, 2008-02-10 at 00:31 +0200, Vladimir Ivashchenko wrote: > > Catalyst 3560 has "mls qos cos override" command, which seems to do > > the trick, but this command is not available on Catalyst 6500. Sorry, I was a little too fast there. I had overseen that part of your mail. Thought the 6500 had the command, but I can see it doesn't. After re-reading the documentation I can see the point: When using "no mls qos trust" the "mls qos cos 5" should actually catch all packets. Anyway, an input service-policy should do it. Regards, Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
