As I understand it... the Inlet is more related to your "room temperature" and the HOT Sensor is internal (where it will always be hotter)....
I look at the Inlet mainly to see if there's any room related changes of drastic nature - but keep an eye on the HOT sensor to indicate air-flow problems internal to the device... That's my understanding ;) Paul -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of eliran h Sent: Monday, March 03, 2008 1:04 PM To: [email protected] Subject: [c-nsp] temperature reading GSR I've typed the command: show environment temperatures Slot # Hot Sensor Inlet Sensor (deg C) (deg C) 0 27.5 28.0 1 34.5 25.5 2 35.0 26.5 3 39.0 26.5 4 57.5 29.0 5 40.0 27.5 6 47.0 32.0 7 36.5 28.0 8 39.0 26.5 9 36.5 26.0 10 41.0 27.0 11 45.0 27.0 12 42.5 31.5 13 42.5 30.5 14 40.5 28.0 15 44.5 32.0 16 40.0 24.0 17 41.0 24.0 18 39.5 23.5 19 39.0 24.0 20 39.0 25.5 24 NA NA 25 NA NA 27 PEM1: OK NA PEM2: OK NA PEM3: OK NA 28 NA 26.0 29 NA 26.0 Cisco specify a temperature range for each line card, Do I need to focus in the HOT sensor or the Inlet sensor? Thanks, _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
