Or clogged air filter which will reduce the amt of air able to be pulled in.
You should change it at least once a year, more often if there is a lot of construction going on. Aaron On Mon, Mar 3, 2008 at 2:33 PM, Pete Templin <[EMAIL PROTECTED]> wrote: > eliran h wrote: > > I've typed the command: > > show environment temperatures > > Slot # Hot Sensor Inlet Sensor > > (deg C) (deg C) > > 0 27.5 28.0 > > > > Cisco specify a temperature range for each line card, Do I need to focus > in > > the HOT sensor or the Inlet sensor? > > Both. High temps at the inlet indicate insufficient cold air. High > temps at the hot sensor indicate poor airflow - think airflow > restrictions, failed fans, etc. > > Consider using SNMP to track these. You should then be able to pull the > warning and critical thresholds on a per-card basis to know when you're > running hot. > > pt > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
