Also worth noting that graphing them with SNMP is also useful to identify long-term trends. I realized we had people putting stuff in a rack next to us backwards (ie hot output into the cold isle) once that way.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Pete Templin Sent: Monday, March 03, 2008 11:33 AM To: eliran h Cc: [email protected] Subject: Re: [c-nsp] temperature reading GSR eliran h wrote: > I've typed the command: > show environment temperatures > Slot # Hot Sensor Inlet Sensor > (deg C) (deg C) > 0 27.5 28.0 > > Cisco specify a temperature range for each line card, Do I need to focus in > the HOT sensor or the Inlet sensor? Both. High temps at the inlet indicate insufficient cold air. High temps at the hot sensor indicate poor airflow - think airflow restrictions, failed fans, etc. Consider using SNMP to track these. You should then be able to pull the warning and critical thresholds on a per-card basis to know when you're running hot. pt _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
