You need to console in and set the SC0 interface up, then you can telnet to it.
Jonathan On Tue, Mar 25, 2008 at 3:20 PM, Adam Greene <[EMAIL PROTECTED]> wrote: > How's this for a stupid question? > > I'm working remotely on a pair of 6509's: CatOS 8.3(3) / IOS 12.1(8a)E3. > > I can telnet to the devices and access the IOS CLI. > > The million-dollar question: how to I access the CatOS CLI? > > As far as I can tell all the switch configs live in CatOS while the routing > configs live in IOS, and I'm trying to gain access to the spanning-tree info > (CatOS), to see if the switch is running PVST+, MST or what. > > Thanks, > Adam > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
