You need the management interface address for the catos side, from their you can session to the msfc/msfc's. Can telnet from the msfc to the catos side if you know the address. Might be able to figure out where it is from the arp table.
David -- http://dcp.dcptech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Adam Greene > Sent: Tuesday, March 25, 2008 4:20 PM > To: [email protected] > Subject: [c-nsp] 6509 noob question > > How's this for a stupid question? > > I'm working remotely on a pair of 6509's: CatOS 8.3(3) / IOS > 12.1(8a)E3. > > I can telnet to the devices and access the IOS CLI. > > The million-dollar question: how to I access the CatOS CLI? > > As far as I can tell all the switch configs live in CatOS > while the routing configs live in IOS, and I'm trying to gain > access to the spanning-tree info (CatOS), to see if the > switch is running PVST+, MST or what. > > Thanks, > Adam > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
