Switch console can only be done from catos. You want to find and entry that has a mac address within the cisco range. What does "sh cdp neighbor" give you. I don't remember this working, but it has been a long time. Then "sh cdp neighbor detail" for the address. Might get lucky.
David -- http://dcp.dcptech.com > -----Original Message----- > From: Adam Greene [mailto:[EMAIL PROTECTED] > Sent: Tuesday, March 25, 2008 4:58 PM > To: David Prall; [email protected] > Subject: Re: [c-nsp] 6509 noob question > > Thanks, all. > > Neither the session nor switch console commands are > recognized on the IOS > side. > > Is there anything specific I should look for in the ARP > table? There are > about 1000 entries in there. > > I guess next step will be to call this switch's admin .... > > thanks, > Adam > > ----- Original Message ----- > From: "David Prall" <[EMAIL PROTECTED]> > To: "'Adam Greene'" <[EMAIL PROTECTED]>; > <[email protected]> > Sent: Tuesday, March 25, 2008 4:45 PM > Subject: RE: [c-nsp] 6509 noob question > > > > You need the management interface address for the catos > side, from their > > you > > can session to the msfc/msfc's. Can telnet from the msfc to > the catos side > > if you know the address. Might be able to figure out where > it is from the > > arp table. > > > > David > > > > -- > > http://dcp.dcptech.com > > > > > >> -----Original Message----- > >> From: [EMAIL PROTECTED] > >> [mailto:[EMAIL PROTECTED] On Behalf Of Adam Greene > >> Sent: Tuesday, March 25, 2008 4:20 PM > >> To: [email protected] > >> Subject: [c-nsp] 6509 noob question > >> > >> How's this for a stupid question? > >> > >> I'm working remotely on a pair of 6509's: CatOS 8.3(3) / IOS > >> 12.1(8a)E3. > >> > >> I can telnet to the devices and access the IOS CLI. > >> > >> The million-dollar question: how to I access the CatOS CLI? > >> > >> As far as I can tell all the switch configs live in CatOS > >> while the routing configs live in IOS, and I'm trying to gain > >> access to the spanning-tree info (CatOS), to see if the > >> switch is running PVST+, MST or what. > >> > >> Thanks, > >> Adam > >> _______________________________________________ > >> cisco-nsp mailing list [email protected] > >> https://puck.nether.net/mailman/listinfo/cisco-nsp > >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > > > > > > > > > > > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
