Frankly we're very happy with our dual hub dmvpn thus far. We're running this on a pair of 2811s with no issues, but our bandwidth per site is small (200-500kb/s). You might look at a pool of cheap hub routers that have ipsec hw acceleration built in (2811, 2821, 37xx) and do some simple load balancing. Once our scale passes the single 2811s we have in place we'll just add more and load balance across them, adding routers to the pool as we need to.
[EMAIL PROTECTED] wrote: > Hi all, > > I'm currently working on a project that involves a number of sites which all > have the potential to cross talk to each other. > > The concept of configuring dual hub - dual DMVPN layout is great, however I > don't really want to mix my internal and public facing traffic on the same > devices (in this case would be NPE-G2's/ 7201's without an accelerator), > although I'd like to hear peoples views and experiences on this, as well as > the level's of throughput they have got doing IPSec on the G2. > > The levels of traffic are generally sub 8Mbps, and I the busy core sites are > less than 20Mbps. > > I'm also open to any other ways to do this whether that be using vendor X's > devices or the such. > > All advice and experiences much appreciated! > > Thanks, > > S > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
