resync is one thing....drop is another.

In newer code we don't drop but we do resync. ;)

R1_#sh run | section router eigrp
router eigrp 1
 network 0.0.0.0
 auto-summary
R1_#config t
Enter configuration commands, one per line.  End with CNTL/Z.
R1_(config)#router ei 1
R1_(config-router)#distribute-list 1 out 
R1_(config-router)#exit  
R1_(config)#access-list 1 deny 4.0.0.0
R1_(config)#access-list 1 permit 2.2.2.0
R1_(config)#end
R1_#
*Apr 22 13:24:16.184: %SYS-5-CONFIG_I: Configured from console by console
R1_#
*Apr 22 13:24:20.972: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 1: Neighbor 2.2.2.2 
(Ethernet1/0) is resync: route configuration changed
R1_#


and on the peer:

*Apr 22 13:24:20.544: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 1: Neighbor 2.2.2.1 
(Ethernet1/0) is resync: peer graceful-restart


Rodney

On Tue, Apr 22, 2008 at 07:08:46AM +0200, Ibrahim Abo Zaid wrote:
> Hi All
> 
> Yes , this is a normal behaviour to EIGRP to resync topology table between
> neighbors after modifying the redistribute-list
> 
> best regards
> --Abo Zaid
> 
> On 4/21/08, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> >
> > Sadly, it is.
> >
> > --
> > Regards,
> >
> > Jason Plank
> > CCIE #16560
> > e: [EMAIL PROTECTED]
> >
> > -------------- Original message ----------------------
> > From: "Jeff Cartier" <[EMAIL PROTECTED]>
> > > Ah nevermind.  Looks like its normal behaviour... *sigh*
> > >
> > >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED] on behalf of Jeff Cartier
> > > Sent: Mon 4/21/2008 3:59 PM
> > > To: [email protected]
> > > Subject: [c-nsp] EIGRP - modify distribute-list and EIGRP neighbor drops
> > >
> > >
> > > Greetings!
> > >
> > > I've coming into an unfamiliar issue where I'm modifying the
> > distribution list
> > > on a Cisco router running EIGRP...I'm creating a vlan management subnet
> > using
> > > loopbacks and vlan SVIs; the thing I'm having trouble explaining is when
> > I
> > > modify the ACL, which is a standard ACL, to permit the subnets that I
> > want to
> > > redistribute, the EIGRP neighbors drop and then re-connect.
> > >
> > > Why is this?
> > > _______________________________________________
> > > cisco-nsp mailing list  [email protected]
> > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > >
> > > _______________________________________________
> > > cisco-nsp mailing list  [email protected]
> > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> > _______________________________________________
> > cisco-nsp mailing list  [email protected]
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> _______________________________________________
> cisco-nsp mailing list  [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to