Elmar K. Bins wrote: > [EMAIL PROTECTED] (Benny Amorsen) wrote: > >> [EMAIL PROTECTED] writes: >> >>> racked a lot of 7200's. never had a problem with them "drooping >>> alarmingly". tighten your screws. >> It IS a problem with 1U front mounted stuff. Even 3750's suffer from >> it. > > 3750s always had the cheapest of housings, 2924s and 2950s suffered > from the same. Interestingly enough, 3560s are quite ok, but that > could be due to their being a bit lighter. > > 7301 had the exact same case as the 7201 (in fact, 7401 had the > same housing, too) but was not as deep and quite a bit lighter > (power supply in the front) and didn't suffer from tumbling down > the rack. > > My solution: Cable ties to a screw... (also helps with 1RU F5 > BigIPs which have adequate housing but are much too deep and too heavy). >
Anyone ever tried having a metal shop make custom brackets that are as long as the case is deep? ~Seth _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
