So would that be a lot 7204/7206 which of course are 3U with substantial brackets.....or lots of 1U 7201 ?
----- Original Message ----- From: <[EMAIL PROTECTED]> To: "Dean Smith" <[EMAIL PROTECTED]>; <[email protected]> Sent: Wednesday, April 23, 2008 11:30 AM Subject: Re: [c-nsp] 7201 rack mounting > racked a lot of 7200's. never had a problem with them "drooping > alarmingly". tighten your screws. > > -- > Regards, > > Jason Plank > CCIE #16560 > e: [EMAIL PROTECTED] > > -------------- Original message ---------------------- > From: "Dean Smith" <[EMAIL PROTECTED]> >> Anyone else shocked at the appalling rack mounting supplied for 7201 ? >> >> Single "ears" at either front or back is simply not good enough for that >> sort of >> box. Look at any 1U server (equivalent value/weight) and you'll get a >> decent >> adjustable rail that can go front to back and offer a proper stable >> mounting >> >> Our first 7201 install is drooping alarmingly (and I dont think its cheap >> rack >> rails) >> >> At cisco prices i dont expect to have to go and buy additional >> shelves/brackets >> just to get an acceptable rack mount solution ! >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
