global option... logging event link-status default (there is also "logging event link-status boot" to suppress the messages during bootup)
or interface option... logging event link-status -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Holemans Wim Sent: Tuesday, April 29, 2008 1:38 AM To: [email protected] Subject: [c-nsp] Port down 6500 warning via syslog I know I have seen this before, but I can't find the article. On most cisco IOS switches, you get syslog messages if a port goes down or up. On a 6500 this is not the case. But I remember seeing an article in which a way was shown how to enable this feature on 65XX IOS. Anyone has a pointer to this article or a short description on how to enable port down/up syslog messages ? Thanks, Wim Holemans Netwerkdienst Universiteit Antwerpen _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
