On Tue, Apr 29, 2008 at 4:38 AM, Holemans Wim <[EMAIL PROTECTED]> wrote:
> I know I have seen this before, but I can't find the article. > On most cisco IOS switches, you get syslog messages if a port goes down > or up. On a 6500 this is not the case. > But I remember seeing an article in which a way was shown how to enable > this feature on 65XX IOS. > Anyone has a pointer to this article or a short description on how to > enable port down/up syslog messages. On practically all of the newer catos switches running ios I've worked on, logging interface events had to be configured on a per interface level. 'logging event link-status' in interface configuration mode should do the trick. Interface range configuration comes in handy here. If there's a more elegant solution I'm all ears. Regars, Laurent G. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
