Thanks for all who answered to my question. The command is : logging event link-status default
Wim Holemans -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Holemans Wim Sent: dinsdag 29 april 2008 10:38 To: cisco-nsp@puck.nether.net Subject: [c-nsp] Port down 6500 warning via syslog I know I have seen this before, but I can't find the article. On most cisco IOS switches, you get syslog messages if a port goes down or up. On a 6500 this is not the case. But I remember seeing an article in which a way was shown how to enable this feature on 65XX IOS. Anyone has a pointer to this article or a short description on how to enable port down/up syslog messages ? Thanks, Wim Holemans Netwerkdienst Universiteit Antwerpen _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/