Or: http://datacomsystemsinc.com/products/details.asp?prod=32&itm=1&cat=5
Forget about the vendor, but the idea of "taps" are that you sit inline and observe traffic on your link. Jason -- Regards, Jason Plank CCIE #16560 e: [EMAIL PROTECTED] -------------- Original message ---------------------- From: Michael Smith <[EMAIL PROTECTED]> > Hello Hank: > > On May 13, 2008, at 6:30 AM, Hank Nussbacher wrote: > > > We recently upgraded our connectivity from GigaE to an STM-16 POS. > > We now > > find that SPAN doesn't cover POS links: > > petach-tikva-gp(config)#monitor session 1 source interface ? > > GigabitEthernet GigabitEthernet IEEE 802.3z > > Port-channel Ethernet Channel of interfaces > > TenGigabitEthernet Ten Gigabit Ethernet > > > > Any clever workarounds for 12.2(18)SXF11? > > > I don't think there is a workaround because SPAN doesn't do POS > interfaces. Can you SPAN from a different ethernet port on the back > end (distribution instead of aggregate)? Also, what type of > information are you trying to get from the POS interface? Perhaps > there is something similar you can poll via SNMP. > > Regards, > > Mike > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
