Cheers will try iperf out, just building 2 Linux PCs now as I type :0)
Regards Kev -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Van Tol Sent: 13 May 2008 17:33 To: Kevin Barrass; [email protected] Subject: Re: [c-nsp] IPv6 load testing > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:cisco-nsp- > [EMAIL PROTECTED] On Behalf Of Kevin Barrass > Sent: Tuesday, May 13, 2008 10:07 AM > To: [email protected] > Subject: [c-nsp] IPv6 load testing > > > Hi > > We are looking to push IPv6 support on our network onto some Cisco > 4500's but as the supervisor we currently have doesn't support IPv6 in > hardware I want to load one of our test 4500s up with realistic IPv6 > Unicast traffic to see what impact it has on the switch. > > Does anyone know of any free software I can get to do this. > > Regards > > Kev iperf should do the job: http://dast.nlanr.net/Projects/Iperf/ -evt _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
