Ya, is there any way to do that without third party devices?
On Sat, May 31, 2008 at 11:42 PM, Joe Maimon <[EMAIL PROTECTED]> wrote: > You want a product that does nat detection. > > Have a look at this vendor > > https://www.bradfordnetworks.com > > > > Dan Letkeman wrote: >> >> Hello, >> >> I'm looking for the best way to prevent unwanted wireless routers or >> other unwanted bridging devices on a network. For example a wireless >> router with the wan port plugged in to the network or a router in >> bridging mode with dhcp off. >> >>> From other posts I have read about using dhcp snooping. I'm wondering >> >> if it works when someone plugs in a router into a switch because the >> "wan" port will only request an address, the dhcp will be on the >> routers "lan" side. >> >> Also I would like to prevent unwanted static ip addresses on this >> network as well. My current setup is a 3560 switch which has multiple >> 2960 switches connected to it. I would like to prevent this type of >> traffic right at the edge ports. Would an access list be the >> appropriate way to protect this? Unfortunately port security will not >> work for us. >> >> Thanks, >> Dan. >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >> > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
