> I've got an IOS (12.3(14)T7) that I'm trying to load onto a 3640 router. > According to the feature navigator, it should require 96mb DRAM, 32mb > flash, which this router has. But, when I try to boot it, it gives me > an out-of-memory error and crashes during boot. Is the FN wrong, or is > there something I can do?
I had this issue many moons ago with a 26xx image. It turns out that the image would run in the specified RAM (just) but only if there wasn't a network module present. This required more RAM and therefore the image wouldn't boot. The feature navigator sometimes doesn't take this into account - it merely lists the minimum RAM required. B. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
