Hi there.. We have a 6509 (sup2) installed and about to bring up some T1 interfaces on it.. confused over the configuration and only have a limited window of time to try and implement off hours tonight ;)
WS-X6182-2PA port adapters with PA-MC-8T1 cards are installed in this box... Currently, the configuration shows: controller T1 6/0/0 framing esf linecode b8zs ! controller T1 6/0/1 framing esf linecode b8zs ! controller T1 6/0/2 framing esf linecode b8zs ! controller T1 6/0/3 framing esf linecode b8zs ! controller T1 6/0/4 framing esf linecode b8zs ! controller T1 6/0/5 framing esf linecode b8zs ! controller T1 6/0/6 framing esf linecode b8zs ! controller T1 6/0/7 framing esf linecode b8zs I expected to see serial interfaces further down in the configuration but nothing is showing... I checked Cisco.com and it keeps referencing configuration on the Serial interfaces (which is the way we have it on 5350/5400 boxes for channelized). Is this because I need to configure timeslots still on the controller? Thanks, Paul _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
