On Mon, 9 Jun 2008, Paul Stewart wrote:
controller T1 6/0/0
framing esf
linecode b8zs
I expected to see serial interfaces further down in the configuration but
nothing is showing... I checked Cisco.com and it keeps referencing
configuration on the Serial interfaces (which is the way we have it on
5350/5400 boxes for channelized). Is this because I need to configure
timeslots still on the controller?
Yes, you need to configure the timeslots. That command is what binds a
TDM resource (T1, DS3, DS0 channel on a T1, etc) to a particular serial
interface.
jms
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
