Yes, they will display in the configuration after your time slots are provisioned.
On Mon, Jun 9, 2008 at 11:15 AM, Paul Stewart <[EMAIL PROTECTED]> wrote: > Hi there.. > > We have a 6509 (sup2) installed and about to bring up some T1 interfaces on > it.. confused over the configuration and only have a limited window of time > to try and implement off hours tonight ;) > > WS-X6182-2PA port adapters with PA-MC-8T1 cards are installed in this > box... > > Currently, the configuration shows: > > controller T1 6/0/0 > framing esf > linecode b8zs > ! > controller T1 6/0/1 > framing esf > linecode b8zs > ! > controller T1 6/0/2 > framing esf > linecode b8zs > ! > controller T1 6/0/3 > framing esf > linecode b8zs > ! > controller T1 6/0/4 > framing esf > linecode b8zs > ! > controller T1 6/0/5 > framing esf > linecode b8zs > ! > controller T1 6/0/6 > framing esf > linecode b8zs > ! > controller T1 6/0/7 > framing esf > linecode b8zs > > I expected to see serial interfaces further down in the configuration but > nothing is showing... I checked Cisco.com and it keeps referencing > configuration on the Serial interfaces (which is the way we have it on > 5350/5400 boxes for channelized). Is this because I need to configure > timeslots still on the controller? > > Thanks, > > > Paul > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
