I suggest you try using a regular policy map, building a class with the traffic matched in an ACL, and apply a regular police policy on that class... Arie
-----Original Message----- From: Hank Nussbacher [mailto:[EMAIL PROTECTED] Sent: Saturday, June 14, 2008 21:50 PM To: Arie Vayner (avayner) Cc: [email protected]; Zenon Mousmoulas Subject: RE: [c-nsp] ip multicast rate-limit On Sat, 14 Jun 2008, Arie Vayner (avayner) wrote: > Hank, > > What are you trying to achieve? > Can you please share "show module"? Trying to limit SAP storms. 11 0 4-subslot SPA Interface Processor-400 7600-SIP-400 JAE12035DJ5 11/0 1xOC48 POS/RPR SPA SPA-1XOC48POS/RPR JAE11441NKV 2.3 Ok -Hank > > Thanks > Arie > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Hank > Nussbacher > Sent: Thursday, June 12, 2008 16:02 PM > To: [email protected] > Cc: Zenon Mousmoulas > Subject: [c-nsp] ip multicast rate-limit > > http://www.cisco.com/en/US/docs/ios/ipmulti/command/reference/imc_03.h > tm > l#wp1016097 > In 12.2(18)SXF11: > > petach-tikva-gp(config)#int pos11/0/0 > petach-tikva-gp(config-if)#ip multicast rate-limit in group-list > SAP-mcast-group 1000 "ip multicast rate-limit" command is not > supported > > So I go to: > http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/ > na > tive/release/notes/OL_4164.html > where it says: > "The ip multicast rate-limit command is not supported on LAN ports. > (CSCds22281)" > > So what 12.2SX version supports ip multicast rate-limit on a POS > interface? > > Thanks, > Hank > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
