Balance them? with a 2960G switch? Right now I don't have any clue how to do it. Any idea?
El mié, 18-06-2008 a las 00:58 +1000, Whisper escribió: > Why don't you want to load balance them? > > Also, the problem with passive/cold-backup solutions is, you never > know until you flip the switch whether they are going to do the job or > not in reality. You can test all you want, but Murphy's Law nearly > always prevails. :) > > On Tue, Jun 17, 2008 at 10:53 PM, luismi <[EMAIL PROTECTED]> > wrote: > Hi all, > > I am trying to find a solution for an issue here, we have two > servers > with the same IP address configuration, both should be > connected to the > same switch but just one is physically connected (the active > node) while > the other one (the passive node) is like a cold-backup, it is > waiting to > be physically connected (or in the other hand, the switch port > should be > enable with a "no shutdown" command) > > Well, in both cases the solution -there is no way to create a > cluster or > configure a keepalive/heartbeat between those servers- > requires an human > intervention, so, I was thinking on use flex links but I have > several > questions that I hope you can help me with them: > > When the backup port is going to be enabled? does it requires > a > down/down or just an up/down? > > Is possible to configure a track or similar to verify the > status of the > server or the port? (take note that the port and the switch > have > different vlans) > > The switch is a 2960G with the "lan base" IOS > > If the switch doesn't support anything to track the > port/server status, > is there any other Cisco switch platform available to do that? > > Thanks for all comments, all are welcome to resolve this. > > Regards > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
