Do you have ebgp-multihop configured on the loopback session? Tim:>
On Wed, Jun 25, 2008 at 8:58 PM, Roy <[EMAIL PROTECTED]> wrote: > Hi, > > We are working with a new ISP for service. This one is via metro ethernet. > They require two BGP sessions. One goes between the ends of the ethernet. > The other BGP session is between a loopback interface on our router and a > loopback interface on one of the ISP's other routers. > > The first session comes up just fine but the second one using loopback > interfaces will not establish. I did some packet traces using a Linux box > and tcpdump and it would seem that the packets from our loopback session go > into the metro ethernet and disappear. When their router tries to connect, > the packets arrive and responses are sent but they too seem to be ignored. > > The ISP blames us of course. I told them the packets seem to be going out > the switch port to the metro ethernet. > Has anyone seem such a problem? Is there some strange magic limit to the > number of peers or something? > > Roy > > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
