Jay Hennigan wrote:
Roy wrote:
Just to bring everybody up to date, the ISP keeps saying its
something we are doing. To eliminates any quirks, we have a spare
router directly connected to the metro ethernet box now. All the
hardware is different and we have tried several version of IOS. The
config has been stripped down to bare bones. I have attached the
relevant portion. The first session (the neighbor ending in .233)
comes up. The other one (ending in .18) fails
Are both sessions perhaps going to the same router on the remote side?
It won't be happy establishing two sessions to the same neighbor. Can
you create another loopback and have the ISP point their neighbor on
the second session to it?
Or if directly connected EBGP over metro ethernet on the same subnet,
just use the ethernet interface for the updates.
--
Jay Hennigan - CCIE #7880 - Network Engineering - [EMAIL PROTECTED]
Impulse Internet Service - http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV
Different routers. The one that works is at the other end of the
ethernet. The one that doesn't is one behind it I think. They told me
to use ebgp-multihop 5. The packet trace shows their packets arriving
with a TTL of 4. ON the off chance of some weird path, I changed
ebgp-multihop to 10 without fixing things
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
