also ensure you have the update source set to loopback (neighbor x.x.x.x update-source loopback0)
-christian On Wed, Jun 25, 2008 at 6:13 PM, Tim Durack <[EMAIL PROTECTED]> wrote: > Do you have ebgp-multihop configured on the loopback session? > > Tim:> > > On Wed, Jun 25, 2008 at 8:58 PM, Roy <[EMAIL PROTECTED]> wrote: > > Hi, > > > > We are working with a new ISP for service. This one is via metro > ethernet. > > They require two BGP sessions. One goes between the ends of the > ethernet. > > The other BGP session is between a loopback interface on our router and > a > > loopback interface on one of the ISP's other routers. > > > > The first session comes up just fine but the second one using loopback > > interfaces will not establish. I did some packet traces using a Linux > box > > and tcpdump and it would seem that the packets from our loopback session > go > > into the metro ethernet and disappear. When their router tries to > connect, > > the packets arrive and responses are sent but they too seem to be > ignored. > > > > The ISP blames us of course. I told them the packets seem to be going > out > > the switch port to the metro ethernet. > > Has anyone seem such a problem? Is there some strange magic limit to the > > number of peers or something? > > > > Roy > > > > > > > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
