When you have the vss core what will you attach to it from the dist\access 
layers? How will they attach to the vss core?

-----Original Message-----
From: Teller, Robert <[EMAIL PROTECTED]>
Sent: Tuesday, July 29, 2008 10:06 PM
To: Mike Louis <[EMAIL PROTECTED]>; Tony Varriale <[EMAIL PROTECTED]>; 
[email protected] <[email protected]>
Subject: RE: [c-nsp] 6509 ACE/FWSM Modules??????????


I will be replacing the 3750 with the 6509's

-----Original Message-----
From: Mike Louis [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 29, 2008 6:19 PM
To: Teller, Robert; Tony Varriale; [email protected]
Subject: RE: [c-nsp] 6509 ACE/FWSM Modules??????????

Last time I checked the 3750 did not support the pagp extensions for
vss. You would get an stp loop if you tried. Has this support changed?

-----Original Message-----
From: Teller, Robert <[EMAIL PROTECTED]>
Sent: Tuesday, July 29, 2008 7:42 PM
To: Tony Varriale <[EMAIL PROTECTED]>; [email protected]
<[email protected]>
Subject: Re: [c-nsp] 6509 ACE/FWSM Modules??????????


My plan is to collapse my core switch(3750), pix, and css devices into
two 6509's with the fwsm/ace/Gig-e modules. I am just trying to decide
the best way to segregate the internal lan and middle tier dmz's.

-----Original Message-----
From: Tony Varriale [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 29, 2008 4:27 PM
To: Teller, Robert; [email protected]
Subject: Re: [c-nsp] 6509 ACE/FWSM Modules??????????

If you want something somewhat Cisco centric, the Networkers slides on
the
ACE blades are ok.  They cover some nice basics about load balancing and

about the ACE blades.

For FWSM, the Cisco docs are decent.  The code is almost the same as on
the
pix/asa.  So the Cisco Press firewall book would do well.

tv
----- Original Message -----
From: "Teller, Robert" <[EMAIL PROTECTED]>
To: "Tony Varriale" <[EMAIL PROTECTED]>; <[email protected]>
Sent: Tuesday, July 29, 2008 6:19 PM
Subject: RE: [c-nsp] 6509 ACE/FWSM Modules??????????


Yeah I am going to have a contractor come in for a day to work on some
of the best practices type stuff but was looking for a book to read on
the side.

-----Original Message-----
From: Tony Varriale [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 29, 2008 4:11 PM
To: Teller, Robert; [email protected]
Subject: Re: [c-nsp] 6509 ACE/FWSM Modules??????????

Sorry, VSS and those modules are not supported yet.

The ACE and FWSM blades are somewhat complex.  I would recommend
piggy-backing on someone that has experience.

tv
----- Original Message -----
From: "Teller, Robert" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, July 29, 2008 5:49 PM
Subject: [c-nsp] 6509 ACE/FWSM Modules??????????


>I am working on implementing two 6509 chassis setup using vss and
> ace/fwsm modules. Anyone know of any good books for the ACE and FWSM
> modules?
>
>
>
> #########################################################
> The information contained in this e-mail and subsequent attachments
may be
> privileged,
> confidential and protected from disclosure.  This transmission is
intended
> for the sole
> use of the individual and entity to whom it is addressed.  If you are
not
> the intended
> recipient, any dissemination, distribution or copying is strictly
> prohibited.  If you
> think that you have received this message in error, please e-mail the
> sender at the above
> e-mail address.
> #########################################################
>
> _______________________________________________
> cisco-nsp mailing list  [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/





_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


Note: This message and any attachments is intended solely for the use of
the individual or entity to which it is addressed and may contain
information that is non-public, proprietary, legally privileged,
confidential, and/or exempt from disclosure.  If you are not the
intended recipient, you are hereby notified that any use, dissemination,
distribution, or copying of this communication is strictly prohibited.
If you have received this communication in error, please notify the
original sender immediately by telephone or return email and destroy or
delete this message along with any attachments immediately.





Note: This message and any attachments is intended solely for the use of the 
individual or entity to which it is addressed and may contain information that 
is non-public, proprietary, legally privileged, confidential, and/or exempt 
from disclosure.  If you are not the intended recipient, you are hereby 
notified that any use, dissemination, distribution, or copying of this 
communication is strictly prohibited.  If you have received this communication 
in error, please notify the original sender immediately by telephone or return 
email and destroy or delete this message along with any attachments immediately.

_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to