Can someone clarify the PAGP problem ? I had a discussion with someone of Cisco for a new design in one of our datarooms and we had chosen a VSS solution with dual 3750E stacks and 20Gig uplinks in each rack to the VSS chassis for max redundantie. According to our Cisco contact, this was a working solution. If however it is impossible to make channels between a 3750E cluster and both switches in a VSS, the complete design has to be redone...
Wim Holemans Network Services University of Antwerp -----Original Message----- From: Mike Louis [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 29, 2008 6:19 PM To: Teller, Robert; Tony Varriale; cisco-nsp@puck.nether.net Subject: RE: [c-nsp] 6509 ACE/FWSM Modules?????????? Last time I checked the 3750 did not support the pagp extensions for vss. You would get an stp loop if you tried. Has this support changed? _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
