Justin, "no arp" in config mode should work for static entries only.
--
Tassos
Justin Shore wrote on 12/8/2008 4:17 μμ:
The argument for clear arp-cache is an interface or null.
6524-2.brd#clear arp-cache ?
interface Clear the entire ARP cache on the interface
<cr>
Ruben was correct with 'no arp <ip>' from global config mode on that
platform with the ZU code.
Justin
Tassos Chatzithomaoglou wrote:
"clear arp-cache x.x.x.x" should work. Just keep in mind that after
doing this, the local router will send an arp request to this mac. If
it's still active, a reply is sent back and the local arp table will
be filled again (you can check the "Age" counter).
--
Tassos
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
