Dan: Unless you're running Greenfield mode, which I'm not sure you can even configure on a Cisco AP, there's full backward compatibility such that 802.11b/g clients will operate at b/g and 802.11n clients (with 2.4 GHz support, of course) operate at n. Be aware that mixing 802.11n with 802.11b/g clients will reduce overall performance, but not significantly enough to devalue running 802.11n.
Frank -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Letkeman Sent: Tuesday, August 12, 2008 8:02 PM To: [email protected] Subject: [c-nsp] 1252ag backwards compatibility Hello, I'm wondering if anyone that has deployed 802.11n 1252 AP's can tell me if you have 802.11g clients and some 802.11n clients all on 2.4ghz, do the 802.11n clients run at 802.11n and the 802.11g clients run at 802.11g? Or does everything run at 802.11g? Thanks, Dan. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
