Can it be prevented, i.e, configuring 1252 to only run 802.11n, even in WDS mode ? We are hoping that 802.11n can improve on Wi-Fi tradition of having low pps rate, which is due to the sum of the 802.11b/a/g standard and low speed processors on the devices.
Rubens On Wed, Aug 13, 2008 at 7:49 PM, Frank Bulk - iNAME <[EMAIL PROTECTED]> wrote: > Dan: > > Unless you're running Greenfield mode, which I'm not sure you can even > configure on a Cisco AP, there's full backward compatibility such that > 802.11b/g clients will operate at b/g and 802.11n clients (with 2.4 GHz > support, of course) operate at n. Be aware that mixing 802.11n with > 802.11b/g clients will reduce overall performance, but not significantly > enough to devalue running 802.11n. > > Frank > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Dan Letkeman > Sent: Tuesday, August 12, 2008 8:02 PM > To: [email protected] > Subject: [c-nsp] 1252ag backwards compatibility > > Hello, > > I'm wondering if anyone that has deployed 802.11n 1252 AP's can tell > me if you have 802.11g clients and some 802.11n clients all on 2.4ghz, > do the 802.11n clients run at 802.11n and the 802.11g clients run at > 802.11g? Or does everything run at 802.11g? > > Thanks, > Dan. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
