Ah wonderful ollie, thought I was going mad! Thanks again
------------------------------------------------ David Freedman Group Network Engineering Claranet Limited http://www.clara.net -----Original Message----- From: Oliver Boehmer (oboehmer) [mailto:[EMAIL PROTECTED] Sent: Mon 9/8/2008 11:43 To: David Freedman; [email protected] Subject: RE: [c-nsp] 12.40(20T), pppoe woes David Freedman <> wrote on Monday, September 08, 2008 12:21 PM: > Have just moved to testing 12.4(20)T for the HQF functionality, have > now hit another stumbling point. > > Was previously doing multiple pppoe sessions (multiple pppoe client > feature) using the HWIC-4ESW > which mandates that the pppoe-client functionality *must* come from > SVI, > in 12.4(20)T this no longer works: > > router(config)# interface Vlan2 > router(config-if)# pppoe-client dial-pool-number 2 > %PPPoE-Client not supported on vlan interfaces > > Placing the client on the actual interface does not work (either PADI > does not get transmitted > or PADO is not interpreted correctly , either way, timeout occurs) > > Has this feature been removed? can't find any reference in 12.4T > release notes against feature documentation or caveats nor does > bugtool come back with anything useful. David, please check CSCsu35584, it will be fixed in the upcoming 12.4(20)T1 rebuild and the above restriction will be removed.. oli _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
