Have just moved to testing 12.4(20)T for the HQF functionality, have now hit another stumbling point.
Was previously doing multiple pppoe sessions (multiple pppoe client feature) using the HWIC-4ESW which mandates that the pppoe-client functionality *must* come from SVI, in 12.4(20)T this no longer works: router(config)# interface Vlan2 router(config-if)# pppoe-client dial-pool-number 2 %PPPoE-Client not supported on vlan interfaces Placing the client on the actual interface does not work (either PADI does not get transmitted or PADO is not interpreted correctly , either way, timeout occurs) Has this feature been removed? can't find any reference in 12.4T release notes against feature documentation or caveats nor does bugtool come back with anything useful. Many thanks, Dave. ------------------------------------------------ David Freedman Group Network Engineering Claranet Limited http://www.clara.net _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
