David Freedman <> wrote on Monday, September 08, 2008 12:21 PM:
> Have just moved to testing 12.4(20)T for the HQF functionality, have
> now hit another stumbling point.
>
> Was previously doing multiple pppoe sessions (multiple pppoe client
> feature) using the HWIC-4ESW
> which mandates that the pppoe-client functionality *must* come from
> SVI,
> in 12.4(20)T this no longer works:
>
> router(config)# interface Vlan2
> router(config-if)# pppoe-client dial-pool-number 2
> %PPPoE-Client not supported on vlan interfaces
>
> Placing the client on the actual interface does not work (either PADI
> does not get transmitted
> or PADO is not interpreted correctly , either way, timeout occurs)
>
> Has this feature been removed? can't find any reference in 12.4T
> release notes against feature documentation or caveats nor does
> bugtool come back with anything useful.
David,
please check CSCsu35584, it will be fixed in the upcoming 12.4(20)T1
rebuild and the above restriction will be removed..
oli
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
