I'm running a Cisco 7206/VXR with an NPE G2, Version 12.4(4)XD4
acting as an LNS.
I'm getting input errors consistently incrementing on the Gig
interface (ignored errors)
Any way to fix this? I saw some discussion a while back about this,
and it seemed to have to do with buffers - but I can't find any
definitive recommendations on what the settings should be.
GigabitEthernet0/1 is up, line protocol is up
Hardware is MV64460 Internal MAC, address is 001a.6d30.091b (bia
001a.6d30.091b)
Description: to gig-fastiron Ethernet11
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 22/255, rxload 46/255
Encapsulation 802.1Q Virtual LAN, Vlan ID 1., loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, media type is RJ45
output flow-control is XON, input flow-control is XON
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 00:22:17
Input queue: 0/75/1191/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
30 second input rate 181384000 bits/sec, 29001 packets/sec
30 second output rate 86319000 bits/sec, 26045 packets/sec
38605963 packets input, 4274358612 bytes, 1 no buffer
Received 230 broadcasts, 0 runts, 0 giants, 0 throttles
2677 input errors, 0 CRC, 0 frame, 0 overrun, 2677 ignored
0 watchdog, 2196 multicast, 0 pause input
0 input packets with dribble condition detected
34556615 packets output, 1656923135 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped
out
---
Clayton Zekelman
Managed Network Systems Inc. (MNSi)
344-300 Tecumseh Rd. E.
Windsor, Ontario
N8X 5E8
tel. 519-985-8410
fax. 519-985-8409
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
