That's only applicable if you have a lot of process switched traffic and you see input drops in 'sh int'.
If you do see input queue drops and the "throttle" count in 'sh int' is going up you might be impacted by that bug. Rodney On Sun, Sep 14, 2008 at 10:21:41AM +0300, Hank Nussbacher wrote: > At 02:16 PM 12-09-08 -0400, Rodney Dunn wrote: > > >I don't suspect that is going to help because the ignores > >are not increasing that would point to: > > > >CSCse05447 > >Externally found moderate defect: Resolved (R) > >7200 ethernet interfaces should not throttle on input queue full drops > > > >Most likely you are seeing micro burst that are coming in faster > >than the CPU can drain the rx ring. > > > >Rodney > > Can't view it: > > "Information contained within bug ID CSCse05447 is only available to Cisco > employees. It is our policy to make all externally-facing bugs available in > Bug Toolkit so the system administrators have been automatically alerted to > the problem. By choosing to save this bug, you may be notified when the > decision to make this bug available to you has been made. Note: Some > product enhancement requests and documentation error bugs may not be > available in Bug Toolkit." > > -Hank > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
