Eric, This should be possible. Take a look here: http://www.cisco.com/en/US/docs/switches/metro/catalyst3750m/software/re lease/12.2_46_se/configuration/guide/swqos.html
Arie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Van Tol Sent: Friday, September 12, 2008 16:59 PM To: '[email protected]' Subject: [c-nsp] ME3750 Shaping Hi all, Does anyone know if the ME3750 can do egress shaping of a particular queue to a limit of >40Mb/s? If so, any examples anyone can share? The goal is to not only police on ingress at a certain limit (25M, 50M, 75M), but also to egress shape at the same limit. I've got the inbound policing just fine, but it seems that the method I found to shape will only do a limit of about 40-50Mb/s. I need to do this on not only non-ES routed ports, but also on non-ES ports that have two VLANs assigned to them, one of which is rate-limited/shaped and one that has WRR with priority queuing. Thanks, evt _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
