Eric, Take a 2nd look here: http://www.cisco.com/en/US/docs/switches/metro/catalyst3750m/software/re lease/12.2_46_se/configuration/guide/swqos.html#wp1282429
Arie -----Original Message----- From: Eric Van Tol [mailto:[EMAIL PROTECTED] Sent: Friday, September 12, 2008 22:30 PM To: Arie Vayner (avayner); [email protected] Subject: RE: [c-nsp] ME3750 Shaping > From: Arie Vayner (avayner) [mailto:[EMAIL PROTECTED] > > Eric, > > This should be possible. > Take a look here: > http://www.cisco.com/en/US/docs/switches/metro/catalyst3750m/software/ > re lease/12.2_46_se/configuration/guide/swqos.html > > Arie Hi Arie, Thanks for the response. I've read this a bunch of times and it seems to me that the proper (and possibly only?) way to do egress shaping is by using the 'srr-queue bandwidth shape' command, which gives you options to set different weights for the queues. The formula for the weights indicates that the weight is a fractional number of the total amount of bandwidth for the port. For a 100M port, a weight of 8 would equal 12.5 percent, or 12.5Mb/s. So, using that formula, if I want to get 50Mb/s shaping on a queue, I use 2 as the number. What about 75Mb/s, or even something else between 50M and 99M? I can't use a floating point, so it looks like I'm pretty much stuck at 1/2 of the bandwidth of the port. Or am I misunderstanding the srr-queue settings entirely (which could certainly be the case)? Thanks, evt _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
