Eric Van Tol wrote: >>You can also do egress rate limitation - 'srr-queue bandwidth limit ><10..90>' >> >>This limits the egress rate to a percentage of the physical port speed.
> > Yes, but this is a limit for all 4 queues combined. It may work for the > layer 3 ports, but not meet the requirements of the layer 2 trunk port with > 2 VLANs on it. Ah. I didn't notice the requirement to shape only one queue. In that case, then yes I believe your understanding of WRR shaping is correct. What exactly are you trying to achieve on the trunk ports? A separate rate for each VLAN? (with associated CoS or DSCP hacking on ingress)? If this is the case you're probably better off wasting a port per VLAN or otherwise freeing up an ES port. (if only the stackwise ports on the ME's were functional) Regards, Brad _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
