> [mailto:[EMAIL PROTECTED] On Behalf Of Gert Doering > > one of our switches is misbehaving, and I'm wondering whether > this is a > configuration thing, or a hardware limitation. > > GigabitEthernet0/10 is up, line protocol is up (connected) > 5 minute input rate 19432000 bits/sec, 32108 packets/sec > 5 minute output rate 380792000 bits/sec, 46406 packets/sec > > As you see, the ports are far from saturated, and even the > load from all > "ingress" ports (380 Mbit + 27 Mbit + 26 Mbit) is far from > the capacity > of the "egress" port (G0/10).
As an aside, you can get more accurate numbers by configuring 'load-interval 30' on each interface. In the last discussion on this list I believe there wasn't an significant CPU impact. ciao Josh _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
