Hello , We upgraded 1252 to lightweight version but AP still wont register to WS-C3750G-24WS-S25 . Any advises ? Some debug from AP , and sh ver below
console messages on AP: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 10.0.200.88, mask 255.255.255.0, hostname AP001f.cabd.b508 %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source Translating "CISCO-LWAPP-CONTROLLER.domain.com"...domain server (213.130.0.1) [OK] %LWAPP-3-CLIENTEVENTLOG: Controller address 10.0.200.3 obtained through DHCP %LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP. %LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER.domain.com %LWAPP-3-CLIENTEVENTLOG: Controller address 10.0.200.3 obtained through DNS %LWAPP-5-CHANGED: LWAPP changed state to JOIN %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: INCOMPATIBLE CONTROLLER VERSION. %LWAPP-5-CHANGED: LWAPP changed state to DOWN sh ver from AP: Cisco IOS Software, C1250 Software (C1250-RCVK9W8-M), Version 12.4(13d)JA, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Fri 08-Feb-08 17:33 by prod_rel_team ROM: Bootstrap program is C1250 boot loader BOOTLDR: C1250 Boot Loader (C1250-BOOT-M) Version 12.4(10b)JA, RELEASE SOFTWARE (fc2) AP001f.cabd.b508 uptime is 0 minutes System returned to ROM by power-on System image file is "flash:/c1250-rcvk9w8-mx/c1250-rcvk9w8-mx" This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to [EMAIL PROTECTED] cisco AIR-AP1252AG-A-K9 (PowerPC 8349) processor (revision A0) with 49142K/16384K bytes of memory. Processor board ID FTX12189109 PowerPC 8349 CPU at 533Mhz, revision number 0x0031 Last reset from power-on LWAPP image version 3.0.51.0 1 Gigabit Ethernet interface 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:1F:CA:BD:B5:08 Part Number : 73-10425-05 PCA Assembly Number : 800-27630-05 PCA Revision Number : A0 PCB Serial Number : FOC121704DG Top Assembly Part Number : 800-29039-01 Top Assembly Serial Number : FTX12189109 Top Revision Number : A0 Product/Model Number : AIR-AP1252AG-A-K9 Configuration register is 0xF -- Best Regards, Andriy Yerofyeyev CCIE #21607 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
