Andy, Which version of code you have on your controller? Best guess is the code you are running on the controller doesn't support the 1252s.
David Andy Yerofyeyev wrote: > Hello , > > We upgraded 1252 to lightweight version but AP still wont register to > WS-C3750G-24WS-S25 . Any advises ? Some debug from AP , and sh ver below > > console messages on AP: > > %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address > 10.0.200.88, mask 255.255.255.0, hostname AP001f.cabd.b508 > > %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source > Translating "CISCO-LWAPP-CONTROLLER.domain.com"...domain server (213.130.0.1) > [OK] > > %LWAPP-3-CLIENTEVENTLOG: Controller address 10.0.200.3 obtained through DHCP > %LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP. > %LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for > CISCO-LWAPP-CONTROLLER.domain.com > %LWAPP-3-CLIENTEVENTLOG: Controller address 10.0.200.3 obtained through DNS > %LWAPP-5-CHANGED: LWAPP changed state to JOIN > %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: INCOMPATIBLE > CONTROLLER VERSION. > %LWAPP-5-CHANGED: LWAPP changed state to DOWN > > sh ver from AP: > > Cisco IOS Software, C1250 Software (C1250-RCVK9W8-M), Version 12.4(13d)JA, > RELEASE SOFTWARE (fc2) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2008 by Cisco Systems, Inc. > Compiled Fri 08-Feb-08 17:33 by prod_rel_team > > ROM: Bootstrap program is C1250 boot loader > BOOTLDR: C1250 Boot Loader (C1250-BOOT-M) Version 12.4(10b)JA, RELEASE > SOFTWARE (fc2) > > AP001f.cabd.b508 uptime is 0 minutes > System returned to ROM by power-on > System image file is "flash:/c1250-rcvk9w8-mx/c1250-rcvk9w8-mx" > > > This product contains cryptographic features and is subject to United > States and local country laws governing import, export, transfer and > use. Delivery of Cisco cryptographic products does not imply > third-party authority to import, export, distribute or use encryption. > Importers, exporters, distributors and users are responsible for > compliance with U.S. and local country laws. By using this product you > agree to comply with applicable laws and regulations. If you are unable > to comply with U.S. and local laws, return this product immediately. > > A summary of U.S. laws governing Cisco cryptographic products may be found > at: > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html > > If you require further assistance please contact us by sending email to > [EMAIL PROTECTED] > > cisco AIR-AP1252AG-A-K9 (PowerPC 8349) processor (revision A0) with > 49142K/16384K bytes of memory. > Processor board ID FTX12189109 > PowerPC 8349 CPU at 533Mhz, revision number 0x0031 > Last reset from power-on > LWAPP image version 3.0.51.0 > 1 Gigabit Ethernet interface > > 32K bytes of flash-simulated non-volatile configuration memory. > Base ethernet MAC Address: 00:1F:CA:BD:B5:08 > Part Number : 73-10425-05 > PCA Assembly Number : 800-27630-05 > PCA Revision Number : A0 > PCB Serial Number : FOC121704DG > Top Assembly Part Number : 800-29039-01 > Top Assembly Serial Number : FTX12189109 > Top Revision Number : A0 > Product/Model Number : AIR-AP1252AG-A-K9 > > Configuration register is 0xF > > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
