David , appreciate your response , below information I gather from controller.
debugging on controller itself does NOT noticed any warning about AP, moreover controller shows AP as registered when AP goes to reboot. Any ideas where I can find information about interoperability between controllers and AP ? I digging into cisco.com without any luck :( ny-vts03-wifi(config-if)#do sh ver Load for five secs: 4%/0%; one minute: 5%; five minutes: 5% Time source is NTP, 23:04:51.846 EST Wed Oct 1 2008 Cisco IOS Software, C3750 Software (C3750-ADVIPSERVICESK9-M), Version 12.2(40)SE, RELEASE SOFTWARE (fc3) Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Fri 24-Aug-07 00:56 by myl Image text-base: 0x00003000, data-base: 0x01700000 ROM: Bootstrap program is C3750 boot loader BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(25r)FZ2, RELEASE SOFTWARE (fc1) ny-vts03-wifi uptime is 1 day, 6 hours, 10 minutes System returned to ROM by power-on System restarted at 16:54:09 EST Tue Sep 30 2008 System image file is "flash:/c3750-advipservicesk9-mz.122-40.SE.bin" (Cisco Controller) >show sysinfo Manufacturer's Name.............................. Cisco Systems Inc. Product Name..................................... Cisco Controller Product Version.................................. 4.0.179.11 RTOS Version..................................... 4.0.179.11 Bootloader Version............................... 4.0.179.11 Build Type....................................... DATA + WPS System Name...................................... ny-wifi01 System Location.................................. System Contact................................... System ObjectID.................................. 1.3.6.1.4.1.9.1.747 IP Address....................................... 10.0.200.3 System Up Time................................... 0 days 0 hrs 3 mins 4 secs Configured Country............................... United States Operating Environment............................ Commercial (0 to 40 C) Internal Temp Alarm Limits....................... 0 to 65 C Internal Temperature............................. +41 C State of 802.11b Network......................... Enabled State of 802.11a Network......................... Enabled --More-- or (q)uit Number of WLANs.................................. 1 3rd Party Access Point Support................... Disabled Number of Active Clients......................... 0 Burned-in MAC Address............................ 00:1B:53:63:DB:00 Crypto Accelerator 1............................. Absent Crypto Accelerator 2............................. Absent Power Supply 1................................... Present, OK Power Supply 2................................... Present, OK (Cisco Controller) >show inventory NAME: "Chassis" , DESCR: "Cisco Wireless Controller" PID: WS-C3750G-24WS-S25, VID: V01, SN: FOC1117G01F On Wed, Oct 1, 2008 at 10:52 PM, David Rose <[EMAIL PROTECTED]>wrote: > Andy, > > Which version of code you have on your controller? Best guess is the > code you are running on the controller doesn't support the 1252s. > > David > > > > > Andy Yerofyeyev wrote: > > Hello , > > > > We upgraded 1252 to lightweight version but AP still wont register to > > WS-C3750G-24WS-S25 . Any advises ? Some debug from AP , and sh ver below > > > > console messages on AP: > > > > %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address > > 10.0.200.88, mask 255.255.255.0, hostname AP001f.cabd.b508 > > > > %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source > > Translating "CISCO-LWAPP-CONTROLLER.domain.com"...domain server ( > 213.130.0.1) > > [OK] > > > > %LWAPP-3-CLIENTEVENTLOG: Controller address 10.0.200.3 obtained through > DHCP > > %LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP. > > %LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for > > CISCO-LWAPP-CONTROLLER.domain.com > > %LWAPP-3-CLIENTEVENTLOG: Controller address 10.0.200.3 obtained through > DNS > > %LWAPP-5-CHANGED: LWAPP changed state to JOIN > > %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: > INCOMPATIBLE > > CONTROLLER VERSION. > > %LWAPP-5-CHANGED: LWAPP changed state to DOWN > > > > sh ver from AP: > > > > Cisco IOS Software, C1250 Software (C1250-RCVK9W8-M), Version > 12.4(13d)JA, > > RELEASE SOFTWARE (fc2) > > Technical Support: http://www.cisco.com/techsupport > > Copyright (c) 1986-2008 by Cisco Systems, Inc. > > Compiled Fri 08-Feb-08 17:33 by prod_rel_team > > > > ROM: Bootstrap program is C1250 boot loader > > BOOTLDR: C1250 Boot Loader (C1250-BOOT-M) Version 12.4(10b)JA, RELEASE > > SOFTWARE (fc2) > > > > AP001f.cabd.b508 uptime is 0 minutes > > System returned to ROM by power-on > > System image file is "flash:/c1250-rcvk9w8-mx/c1250-rcvk9w8-mx" > > > > > > This product contains cryptographic features and is subject to United > > States and local country laws governing import, export, transfer and > > use. Delivery of Cisco cryptographic products does not imply > > third-party authority to import, export, distribute or use encryption. > > Importers, exporters, distributors and users are responsible for > > compliance with U.S. and local country laws. By using this product you > > agree to comply with applicable laws and regulations. If you are unable > > to comply with U.S. and local laws, return this product immediately. > > > > A summary of U.S. laws governing Cisco cryptographic products may be > found > > at: > > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html > > > > If you require further assistance please contact us by sending email to > > [EMAIL PROTECTED] > > > > cisco AIR-AP1252AG-A-K9 (PowerPC 8349) processor (revision A0) with > > 49142K/16384K bytes of memory. > > Processor board ID FTX12189109 > > PowerPC 8349 CPU at 533Mhz, revision number 0x0031 > > Last reset from power-on > > LWAPP image version 3.0.51.0 > > 1 Gigabit Ethernet interface > > > > 32K bytes of flash-simulated non-volatile configuration memory. > > Base ethernet MAC Address: 00:1F:CA:BD:B5:08 > > Part Number : 73-10425-05 > > PCA Assembly Number : 800-27630-05 > > PCA Revision Number : A0 > > PCB Serial Number : FOC121704DG > > Top Assembly Part Number : 800-29039-01 > > Top Assembly Serial Number : FTX12189109 > > Top Revision Number : A0 > > Product/Model Number : AIR-AP1252AG-A-K9 > > > > Configuration register is 0xF > > > > > > > > > > -- Best Regards, Andriy Yerofyeyev CCIE #21607 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
