Your pvc needs to be abr/vbr/cbr You can't do it on ubr Regards
Brian -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Networkers Sent: venerdì 17 ottobre 2008 17.10 To: [email protected] Subject: [c-nsp] 7206VXR and CBWFQ Whenever I try to apply the following I get an error message about how CBWFQ can't be applied to subinterfaces. What is the correct way to do this? Thanks, Chris class-map match-any VOIP match ip dscp ef match precedence 5 class-map match-all CRITICAL match access-group 100 policy-map MyCBWFQ class CRITICAL priority 48 class VOIP bandwidth 320 set precedence 6 vc-class atm MyClass ubr 1536 encapsulation aal5mux ppp Virtual-Template5 interface Virtual-Template5 ip unnumbered Loopback0 service-policy output MyCBWFQ peer default ip address pool default ppp authentication pap callin interface ATM2/0.1921 point-to-point pvc 1/1921 class-vc MyClass _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
