Thank you so much. Good learning for me ls there any best practice tip also? I heard some AAA model. but I don't know exactly
Thank you On Fri, Oct 17, 2008 at 2:30 PM, Stephen Kratzer <[EMAIL PROTECTED]> wrote: > On Friday 17 October 2008 13:28:35 kcc wrote: > > > Hi all > > > > > > I am new in cisco > > > > > > 1/ Can I know what is this command issue? > > > > > > cisco6513(config)#username peter privilege 15 password 7 peterpassword > > > Invalid encrypted password: peterpassword > > This command is invalid because the string 'peterpassword' is plaintext. > Change the 7 to 0. > > > > 2/ I want to learn about best practice when doing the cisco config? > > > eg: > > > I heard it is better to issue command "eg: shutdown xx sec" when doing > > > the remote configure critical routes > > > it can avoid the lost connection. the router can reload the startup > > > config even though loss the connection > > If you are making changes that could potentially cause loss of remote > connectivity, and you do not have physical access to the box, it is best > practice to issue 'reload in x' where x is the minutes until reload. You > want > to ensure that x is long enough to make and verify your changes but short > enough not to cause extended downtime if you make a mistake. Five to ten > minutes is usually good for us. And remember to issue 'reload cancel' if > your > changes are made successfully. > > > > Thank you for your help > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
